Jinteng Chemical interception bottle for pump

Jinteng interception bottle specifications:
Outer diameter: 6.8cm
Height: 18.5cm
Volume:
Weight: 660g
Inner diameter of interface: 6mm
Tower interface material: PTFE
Retention bottle material: high borosilicate glass
Tianjin Jinteng 300ml interception bottle (anti-suction device)

Instructions for Tianjin Jinteng Retention Bottle:
The role of retention bottle:
The front is connected to the negative pressure nozzle of the vacuum pump to prevent liquid from entering the pump, to prevent the corrosion of the pump body due to the inflow of liquid, to extend the service life of the vacuum pump, and to use with filters (multiple filters, solvent filters).
installation method:
1. First, open the blue cap with a gas nozzle and a trap valve in the trapping bottle in the box, take out the 50mm rubber tube, and then tighten the cap.
2. Connect one end of the 50mm hose to the air nozzle marked "OUT" on the blue cap, and connect the other end to the negative pressure air nozzle of the vacuum pump. One end of the long plastic tube in the interception bottle must be connected to the negative pressure of the vacuum pump.
3. Connect the hose on the filter to the side marked with "IN".

Tianjin Jinteng interception bottle operation and precautions:
1. Turn on the vacuum pump during work, without human observation and control. Once the liquid fills the container and flows into the trap bottle, the trap valve plays a role to prevent the liquid from intruding into the pump.
2. Turn off the power supply of the vacuum pump, remove the trap bottle, unscrew the blue cap, pour out the liquid in the trap bottle, and install it for repeated use.